OPTIMYST WALL ENGINE OMWFC20 RTOPW20 PEM20 08/51462/0 Issue 5 The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3 These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC
Opti-myst wall engine Model: OMWFC20 - RTOPW20 - PEM20 IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE Important Safety Advice: When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock and injury to persons, including the following: If the appliance is damaged, check with the supplier before installation and operation. Do not use outdoors.
PLEASE RETAIN THIS USER’S GUIDE FOR FUTURE REFERENCE Only use filtered tap water in this appliance. Always ensure that the appliance is fixed to the wall in a level position. If you intend not using the appliance for longer than 2 weeks, drain the water from sump and water tank and dry the sump. Once commissioned, never move this appliance or lay on its back, without draining the water from sump and water tank.
outlet, then continue normal operation. Caution: In order to avoid hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a switch that is regularly switched on and off by the utility. Tips for using your appliance. 1. With the flame and smoke setting on minimum the unit will use approximately 40ml of water per hour and will last 3 times as long than when it is at maximum flame setting. 2.
4. Disconnect the electrical connector, located on the right side of the sump. (See Fig.6) . 5. Release the right sump locking tabs by turning 90º, this allows the sump to be lifted completely from its location. (See Fig.6a) 6. Gently lift up the sump, taking care to keep level so as not to spill any water. Sit the assembly in the sink. 7. Release the left sump locking tabs by turning 90º, then lift off the Nozzle. (See Fig.4) 8.
Patent / Patent Application Products within the Optimyst range are protected by one or more of the following patents and patent applications: Great Britain GB 2402206, GB 2460259, GB 2460453 , GB 2418014, GB 2465738, GB 2449925, GB 2465537 , GB 2455277 , GB1020534.2, GB1020537.5, GB1110987.3 United States US 7967690, US 2010299980, US 2011062250, US 2008028648, US 13/167,042 Russia RU2008140317 European EP 2029941, EP 2201301, EP 2315976, EP 1787063, EP07723217.1 , EP11170434.2, EP 11170435.
Fig.1 Fig.2 Fig.4 Fig.3 Fig.
Fig.6 Fig.5 Fig.6a Fig.8 Fig.7 Fig.
Fig.10 Fig.11 Fig.
Opti-myst is a trade mark of GDC Group Ltd. DIMPLEX MILLBROOK HOUSE GRANGE DRIVE HEDGE END SOUTHAMPTON TEL: 0844 879 3588 FAX: 0844 879 3583 WEBSITE: www.dimplex.co.uk Republic of Ireland Tel. 01 8424833 SO30 2DF [c] GDC Group Ltd, All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Dimplex.
