Owner`s manual
5
iii) This will release the heater panel and allow it to be folded down.
WARNING: To reduce the risk of burning of the skin or other injury,
do not fold any of the panels down without allowing them to cool.
Should a panel be folded down without rst turning off the unit,
there is a safety feature that automatically shuts off the panel to
prevent damage and injury.
7. The heater can be used with one, two or three panels. Fold down
those panels that will not be required before turning the unit on.
Operation
Grounding Instructions
This product must be grounded, If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to
reduce the risk of electric shock. This product is equipped with an
electrical cord having an equipment – grounding conductor and a
grounding plug. The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with all local
codes and ordinances.
CAUTION: Always ensure that there is sufcient distance for
safety (at least 3 feet (0.9 m)) between the apparatus and the wall
or other objects.
1. Connect the plug to a GFI 13 Amp, 120 Volt outlet.
2. Press the rocker switch on
the unit marked by “●”
(Figure 5) for 500 Watts of
heat and only one heater
panel will activate. Press
the rocker switch marked by
“● ●” only and two heater
panels will activate producing
1000 Watts of heat. Press
the two rocker switches
together to produce 1500 Watts of heat.
Figure 5
On
position
On
position
Off
position
Off
position