RAIL SUITE XHD23L-AU-RL 8/54717/0 Issue 3 OCN:11800 The product complies with the Australian Safety Standards and the Standard Electromagnetic Compatibility.
1 2 A G B D C E F H 3 4
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE Important Safety Advice When using electrical appliances, basic precautions should be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: If the appliance is damaged, check immediately with the supplier before installation and operation. Do not use this appliance in the immediate surroundings of a bath, shower or swimming pool. Do not use outdoors.
Controls: See Fig. 2 Icon Function Description A Power Press to turn unit Off or On. • Unit Off Press to turn everything Off. Press again to turn unit On with previous settings. • Unit On Press to turn unit On with previous settings. - If the flame effect was On, the flame will turn on and the previous heat setting will be activated (On or Off). Display will show current heater temperature setting and after 2 sec displays the room temperature.
Remote Control - See Fig. 2 The maximum range of use is ~ 9metres. NOTE: It takes time for the receiver to respond to the transmitter. NOTE: The reciever for the remote control is located in the display, aim the remote control in this direction when inputting commands. Do not press the buttons more than once within two seconds for correct operation. Battery Information 1.
Glen Dimplex Australia 8 Lakeview Drive, Scoresby, VIC 3179, Australia www.dimplex.com.au sales@glendimplex.com.au Ph: 1300 556 816 Glen Dimplex New Zealand Pty Ltd. 35 Harris Road, East Tamaki, 2013 Auckland New Zealand www.dimplex.co.nz sales@glendimplex.co.nz Ph: 0800 666 2824 © Glen Dimplex Heating & Ventilation. All rights reserved. Material contained in this publication may not be reproduced in whole or part, without prior permission in writing of Glen Dimplex Heating & Ventilation.
