Specification Sheet

22 | COMMERCIAL HEATERS TO ORDER PLEASE CALL 1-800-668-6663 OR FAX [phone]
Commercial Fan Forced Heater
RFI / RFV / RFF Series
RFF Series
Specifications
Voltage 208, 240, 347, 600V
Wattage Nine sizes ranging from 1125 to 8000W
Colour Almond or White
Finish Polyester epoxy powder coat painted finish.
Construction The front panel is constructed of 20 gauge steel. The wall box is
designed for recessing into either frame or masonry walls and contains
knockouts for wiring connections.
Heating The RFI/RFV/RFF wall heater has a nickel chromium resistance wire
element heating element within a steel sheath. Spiral steel fins are firmly brazed
to the surface to provide excellent heat transfer.
Motor & The fan motor is totally enclosed and factory lubricated complete with a
Fan black anodized 5 blade mixed flow aluminum fan. The fan delay is a
bi-metallic snap action type.
Controls & 208V and 240V units have a standard double pole built-in
wiring thermostat with provision for a remote wall stat if required. 347V and
600V units have a built in thermostat. Use low voltage relay kits and
suitable wall mount thermostat for remote temperature control.
Warranty One year on complete unit. UL and CSA approved.
Features
• Quick response of
fan-forced heat when
required
• Automatic fan delay to
remove residual heat when
unit cycles off
• Recessed or surface
mounting ceiling or wall
• 50/60 cycle rating
• Exclusive aesthetically
pleasing front panel trim
• Access door can be
locked for tamperproof
applications on RFI model
Applications
• Vestibules, entrance ways,
stairwells, kiosks
Solutions for maintaining comfort in areas subject to cold drafts,
such as vestibules, stairwells etc.
RFITF T-bar Ceiling Mount Trim (white only)
RFI Series
RFV Series
TABLE OF CONTENTS