Owner’s Manual Revillusion® 25" Electric Log Set Model RLG25 (6909760159) IMPORTANT SAFETY INFORMATION: Read this manual first before attempting to install or use the Revillusion® Log Set. Always comply with the warnings and safety instructions contained in this manual to prevent personal injury or property damage. To view the full line of Dimplex products, visit www.dimplex.
Table of Contents Welcome.............................................................3 IMPORTANT INSTRUCTIONS........................... 4 Installation..........................................................6 Operation............................................................9 Maintenance..................................................... 11 Warranty...........................................................12 Technical Support.............................................
Welcome Thank you for purchasing a Revillusion® Log Set by Dimplex. Please use our convenient online registration page to record your model and serial numbers for future reference at: www.dimplex.com/register Model Number MODEL / CAT NO MOD SERIAL NO Serial Number CAUTION: Read all instructions and warnings carefully before starting installation. Failure to follow these instructions may result in a possible electric shock or fire hazard and will void the warranty.
IMPORTANT INSTRUCTIONS Basic Precautions When using any electrical appliance, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons. These precautions include: ① Read all instructions before using the log set. DANGER: High temperatures may be generated under certain abnormal conditions. Do not partially or fully cover or obstruct the front of the log set.
IMPORTANT INSTRUCTIONS Special Precautions FCC Compliance WARNING: Remote control contains a small battery. Keep away from children. If swallowed, seek medical attention immediately. CAUTION: This unit has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Installation The Revillusion® Log Set offers an alternative to wood or gas fireplaces. It can give your existing fireplace new life or transform a cabinet or media center of your own into a stunning focal point. Specifications Placement Electrical Volts: 120 V, 60 Hz Amps: 12.5 A Watts: 1500 W Wiring: Plug-In Bulb Type: LED 1. The Revillusion log set does not Approvals require any special venting. Install the unit in an opening with the minimum dimensions: A. 26" (660 mm) wide, B. 22" (559 mm) high C.
Installation Assembly 1. Place the log set into position. a. Lift the log set by holding the sides of the heater box for stability. Do not lift by gripping the logs or the grate front legs. b. If installing the unit in a carpeted area, place a one-piece, solid, flat surface under the unit. Make sure that both of the grate feet rest securely on this surface. CAUTION: Each of the Realogs™ contain LEDs that pulse and glow. Handle the log set carefully. They are fragile and can crack or break if dropped. 4.
Installation Grounding Instructions This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Operation Manual Control The manual controls for the Revillusion are located on the right-front leg of the log grate. base yellow with yellow 360 LEDs, flame base blue with 360 LEDs. (Feature is active only when the flame effect is On.) Brightness Press multiple times to toggle the log set LEDs through its four brightness settings. Remote Control Power Press to turn the flame effect on and activate the previous heat setting (Off, Low, or High). Press again to put the unit in standby mode.
Operation -- If the flame effect was On, the previous heat setting will be activated (High, Low, or Off). -- If the flame effect was Off, the previous heat setting will be activated (High or Low). Press again to turn everything Off. Flame Press to light the back log, grate log, and ember mat, and start the flame effect. Heat Heat On Press to set the heat to Low (indicated by 1 short beep). Press again to set the heat to High (indicated by 2 short beeps).
Maintenance General Maintenance Clean Mirage™ Flame Panel Inspect the log set regularly, depending upon conditions, and at a minimum yearly intervals. Remove dust and clean the logs, mat, grate, and base as required. The Mirage™ Flame Panel is cleaned in the factory during the assembly operation. During shipment, installation, handling, etc., the screen may collect dust particles; these can be removed by dusting lightly with a clean dry cloth.
Warranty Two Year Limited Warranty Products to which this limited warranty applies This limited warranty applies to your newly purchased Dimplex cassette and to newly purchased Dimplex fireplace surrounds (mantels) and trims. This limited warranty applies only to purchases made in any province of Canada except for Yukon Territory, Nunavut, or Northwest Territories or in any of the 50 States of the USA (and the District of Columbia) except for Hawaii and Alaska.
Warranty warranty service requires a proof of purchase of the product.
Warranty costs shall not be the responsibility of Glen Dimplex Americas. • On-site or in-home services not provided under this warranty may be performed at the purchaser’s specific request and expense at Glen Dimplex Americas thencurrent rates for such services. What Glen Dimplex Americas and its dealers and service agents are also not responsible for: IN NO EVENT WILL GLEN DIMPLEX AMERICAS, OR ITS DIRECTORS, OFFICERS, OR AGENTS, BE LIABLE TO THE PURCHASER OR ANY THIRD PARTY.
