Operating instructions

E-11
English
Configuring the Heat Pump Heating System 6.3
6.2 Outputs
Depending on the system configuration, the “Outputs” menu
displays the “OFF or ON” status display for the following outputs:
6.3 Inputs
Depending on the system configuration, the “Inputs” menu
shows the “Open or Closed” status display for the following
digital inputs:
 
 
Sets the start time for the thermal disinfection 00:00
...
23:59
Domestic hot water
Sensor
Flange heater
 

Sets the desired hot water temperature which is
to be reached during thermal disinfection
60 °C
... 65 °C...
85 °C
Domestic hot water
Sensor
Flange heater
 

For each day of the week, it is possible to select
whether thermal disinfection is desired at the
set start time.
N
Y
Domestic hot water
Sensor
Flange heater
 
 
Sets the date, year, day, month and week day Always

The language for menu navigation can be
selected from the available languages
DEUTSCH
ENGLISH
FRANCAIS
ITALIANO
CESKY
Always

System-specific parameters
Setting range Display

Display
 
Always

 
Cooling function
Hot water / sensor / flange heater
 
Heating circuit 2 or silent cooling
 
Heating circuit 2 or silent cooling
 
Heating circuit 2 or silent cooling
   
Hot water / sensor / flange heater

Display
  
Always
  
Always
 
Always
 
Always
 
Always
 
Always