Installation Manual

ManualsBrandsDinan ManualsAutomotiveDinan D440-0010 Fuel Injection Calibration Module

INS440-0010 Page 1 of 4 Rev 11/16/16

INSTALLATION INSTRUCTIONS

PART NUMBER D440-0010

APPLICATION: BMW N20, N26, & N55 vehicles

________________________________________________________________

PARTS LIST

Qty Part # Description

1 D443-0100 DINANTronics SPORT Module; Black

3 Zip ties

________________________________________________________________

Congratulations for being selective enough to use DINANTronics SPORT Performance

Tuner. We have spent many hours developing this kit to assure that you will receive

maximum performance and durability with minimum difficulty in installation. Please take

the time to read these instructions and call us if you have any difficulties during the

installation.

INSTALLATION:

1. Make sure ignition is OFF.

2. The DINANTronics SPORT ICP module is identified with a MAC address. Please

note the last 4 characters. This will be needed by the optional smart phone app to

establish a connection. The app allows live boost monitoring, as well as the ability to

switch performance modes. The app is not needed to realize performance gains

from DINANTronics SPORT.

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS PART NUMBER D440-0010 APPLICATION: BMW N20, N26, & N55 vehicles ________________________________________________________________ PARTS LIST Qty Part # Description 1 D443-0100 DINANTronics SPORT Module; Black 3 Zip ties ________________________________________________________________ Congratulations for being selective enough to use DINANTronics SPORT Performance Tuner.
PAGE 2
N55 (3.0L 6-cylinder) engines only 3. Remove the engine cover if needed. Identify the pressure sensor mounted to the intake charge pipe.  The intake charge pipe runs from the intercooler exit, to the intake manifold.  The pressure sensor will have a connector that is identical the ones on the DINANTronics SPORT module.
PAGE 3
N20 & N26 (2.
PAGE 4
. Disconnect the wiring harness from the pressure sensor. 5. Install the DINANTronics SPORT module in between the sensor, and the wiring harness. The connectors can only be installed one way. Make sure that the locking tangs on both connections are secure. 6. Using the included zip-ties, mount the module in a secure location, away from any moving engine components.
PAGE 5
APP WALKTROUGH & GENERAL FAQ ________________________________________________________________ DINANTRONICS SPORT APP ________________________________________________________________ Congratulations for being selective enough to use a DINANTronics SPORT Performance Tuner. While not required to run the unit, in order to have full functionality of the tuner you will want to download the associated smart phone app which can be found on either the iTunes (iOS) or the Google Play store (Android).
PAGE 6
Boost Monitor On/Off Slider Boost Monitor/Gauge Digital Readout Boost Monitor/Gauge & MAX Indicator Analog Readout Performance Setting On/Off Slider Boost Monitor/Gauge Reset/Re-Zero Performance Setting Indicator Refresh Performance Setting Selections APP GENERAL OVERVIEW: Boost Monitor & Performance Setting Sliders: There are 2 on/off sliders within the app. At any given time only 1 will be active -- they cannot be activated at the same time.
PAGE 7
Performance Setting Indicator Refresh: If you need to see what mode / PSI level you are currently running, you can press this button to display what the currently active setting is, and the boost increase being applied. Boost Monitor / Gauge Readouts & Reset: When the top slider is activated, the boost monitor will be displayed and begin to report readings. Before doing anything you will want to press the reset/re-zero button in the bottom right.
PAGE 8
________________________________________________________________ DINANTRONICS SPORT INSTALLATION TROUBLESHOOTING ________________________________________________________________ Problem: After install a check engine light is present. Solution: - During install the car may have “woken up”. Prior to install turn off the car and wait 10 minutes with the key fob outside of the activation area. Proceed with install with key fob outside of the activation area.