Service manual

【7-14】
E
LECTRICAL SYSTE
M
Lighting System
Headlight Bulb Replacement
● Remove:
Bulb Holder Screws [A]*2
Bulb Holder Bolts [B]*2
Bulb Holder
Bulb
○ Turn the holder counterclockwise and pull it out.
● Be sure the socket is clean.
● Insert the new bulb by aligning the tang with the notch in
the headlight unit.
● Push the holder in, turn it clockwise, and release it, it
should lock in position.
Turn Signal Bulb Replacement
● Remove:
Turn Signal Connector [A]
Turn Signal Screw [B]
Turn Signal [C]
● Remove:
Turn Signal Lens Mounting Screws [A] and Nuts
Turn Signal Lens [B]
● Remove the bulb [A] by turning it counterclockwise.
● Insert the new bulb by turning it clockwise.