Service manual

【1-8】
GENERAL I
N
F
ORMATIO
N
Periodic Maintenance Chart
Perform a Pre-Ride inspection before every ride and at schedule maintenance periods.
Interval (whichever comes first)
C=Clean
R=Replace
L=Lubricate
I=Inspect, Verify, Clean, Adjust, Lubricate, Replace if
necessary.
Regular Maintenance Interal (houre)
Regular Maintenance
(Riding Km)
Items
Break-in
(1 hour)
Inital
After 10 hr
Every 1
month
Every 3
month
Every 6
month
Note 200 Km 500Km 1000Km
WARNING LABELS (condition, readable) I I I I I I I I I
○
FRAME (mainframe,subframe,swingarm) I I I
▲
FUEL SYSTEM (hoses, tank, level) I I I
BATTERY (terminals) I,C I
▲
THROTTLE OPERATION I I I I
AIR FILTER I C C R
★
I I
AIRBOX DRAIN TUBE I,C I
★
I I
SPARK PLUG I R R
○
IDLE SPEED I I Adjust as required
▲
EXHAUST (spark arrester) C C
SWITCH (engine, stop, start, tether, ignition) I I
★
▲
LIGHTING (headlight, tail light, turning lights) I I
ENGINE OIL I R R
＊
R R
ENGINE OIL FILTER(s) C R R R R
DRIVE CHAIN (sag, stretch, buffer, guide, sprockets
(condition/tightness), guards.
I I I
★
I
○
BRAKE FLUID I I
＊
I
▲
BRAKE SYSTEM (cables, discs, pads, hoses, etc.) I I
★
I
BRAKE, REAR, DISC CARRIER I I I R I
COOLANT (radiator, cap, hoses, level, strength) I I R
＊
I
SUSPENSION (front/rear shocks, condition, setting) I I I I
NUTS,BOLTS AND FASTENERS I I I I
○
SEAT (condition, wear, damage) I
▲
WHEELS/TIRES (pressure, condition, wear) I I I I I
SWINGARM (bearings) I I
★
▲
STEERING ASSEMBLY (fasteners, operation) I
★
I
A-ARM ( Bushing ball Joint) I
★
I
TIE ROD ENDS
I I I
★
▲Dinli dealer service suggested that servicing owners should have the proper tools, service data, and be mechanically qualified.
○Operational safety involved, The service should be performed by a Dinli dealer.
★Service more frequently if operation in dusty, sandy or snowy area or conditions.
＊Change every 2 years.