Service manual

【2-5】
WHEELS/TIRE
S
●Check the toe-in.
●Tighten:
Torque - Tie-Rod Adjusting Sleeve Locknuts: 33 N-m
(3.4 kgf-m, 45 ft-lb)
●Test ride the vehicle.
Wheels (Rims)
Wheel Removal
●Loosen the wheel nuts [A]
●Support the vehicle on a stand or the jack so that the wheels
are off the ground.
●Take off the wheel nuts and remove the wheel.
Wheel Installation
●Check the tire rotation mark [A] on the tire, and install the
wheel accordingly.
NOTE
○The direction of the tire rotation is shown by an arrow on
the tire sidewall.
●Position the wheel so that the air valve [A] is toward the
outside of the vehicle.
●Tighten the wheel nuts in a criss-cross pattern.
Torque- Wheel Nuts: 52 N-m (5.3 kgf-m, 38 ft-lb )