Service manual

【2-9】
WHEELS/TIRE
S
Front Hub Removal
●Remove the cotter pin [A] and loosen the axle nut [B].
●Remove the wheel (see Wheel Removal).
●Remove the caliper by taking off the mounting bolts [C],
and let the caliper hang free.
●Remove the axle nut and pull off the front hub brake disc.
●Separate the brake disc from the front hub.
Front Hub Installation
●Grease::
Seal
Front Spindle
●Tighten:
Torque - Front Spindle Nut: 145 N-m (15.0 kgf-m, 110
ft-lb )
●Insert a new cotter pin [A] and bead it over the nut [B]
Front Hub Disassembly/Assembly
●Don not press the hub bolts out.
★If any hub bolt [A] is damaged, replace the hub [B] and
bolts as a unit.