Service manual

【6-2】
E
NGINE
ENGINE REMOVAL
● Drain engine oil and transmission oil.
● Remove frame covers (Refer to the “Frame” chapter).
● Remove the carburetor.
● Remove the Exhaust Pipe.
Torque Value:
Engine Oil Drain Plug 1.5kgf-m
Exhaust Pipe Nut 1.8 – 2.2kgf-m
● Disconnect the water hose from water pump cover.
● Remove the bolt at the thermostat and disconnect the thermo
sensor wire, then disconnect the thermostat from the
cylinder head.
● Remove the bolt at the drive select arm and then disconnect
the drive select arm from engine assembly.