Service manual

【6-22】
E
NGINE
DRIVE PULLEY
REMOVAL
● Remove the left crankcase cover. (Refer to the “LEFT
CRANKCASE COVER REMOVAL” section)
● Hold the drive pulley using a universal holder and remove
the drive face nut and washer.
● Remove the drive pulley.
● Remove the movable drive face assembly and drive pulley
collar.
DISASSEMBLY
● Remove the ramp plate.
● Remove the six weight rollers.
INSPECTION
● Check each weight roller for wear or damage.
● Measure each weight roller O.D.
Service Limit: ψ22mm replace if below.