Service manual

【6-33】
E
NGIN
E
CRANKCASE/CRANKSHAFT/BALANCE
SHAFT
SERVICE INFORMATION
GENERAL INSTRUCTIONS
This section covers crankcase separation to service the
crankshaft. The engine must be removed for this operation.
The following parts must be removed before separating the
crankcase.
Cylinder head/Cylinder/piston/Drive and driven pulleys
/A.C. generator/Starter clutch/Oil pump
SPECIFICATIONS
TORQUE VALUES
Crankcase bolt 1.0 – 1.4kgf-m
Cam chain tensioner slipper bolt 1.0 – 1.4kgf-m
Cam chain cover bolt 1.0 – 1.4kgf-m
Item Standard (mm) Service Limit (mm)
Connecting rod big end side clearance 0.15 – 0.35 0.60
Connecting rod big end radial clearance 0.004 – 0.013 0.05
Crankshaft
Run out 0.03 0.10