Switzerland Dino-Lite digital microscope User Manual EN - User Manual www.ideal-tek.
Switzerland CONRAD ARTICLE CODE MODEL CONRAD ARTICLE CODE MODEL 1284397 AD4113ZT 1284413 AM4116ZT 1284406 AM2111 1284414 AM4023X 1284407 AM3113T 1284415 AM4515ZT 1284408 AM4112PZT 1284416 AM4815ZT 1284409 AM4113T5 1284417 AM7013MZT 1284410 AM4113TL 1284418 AM7023 1284411 AM4113ZT 1284419 MS35B 1284412 AM4115ZT www.ideal-tek.
Switzerland ENGLISH Thank you for purchasing a Dino-Lite microscope. The DinoCapture software is designed to give you the best possible digital microscopy experience by the inventors of the handheld digital microscope. The DinoCapture software runs on computers with a Windows XP, Windows Vista or Windows 7/8 operating system. The DinoXcope software is designed to work with Apple Macintosh OS.
Switzerland SOFTWARE INSTALLATION The DinoCapture and DinoXcope software is licensed from Anmo Electronics Corporation and is subject to an End User License Agreement (EULA) that users will have to accept during the installation process. Important notice: DO NOT connect the USB cable of the Dino-Lite to the PC before installing the software. 1. Use the CD delivered with your Dino-Lite to install the DinoCapture and DinoXcope software and drivers.
Switzerland 2. Please use a USB 2.0 port that is fully powered. Some USB ports on portable computers do not supply sufficient power. 3. The driver will be automatically installed. Please WAIT until the notification appears: ‘Device driver software installed successfully’. 4. Now start DinoCapture 2.0 by double clicking on the desktop icon. 5. The LED lights should go on and an image should appear in DinoCapture. HARDWARE FEATURES 1. At the center of the device, the adjustable dial is used to set the focus.
Switzerland an existing ocular and the C model is intended to be connected to a Cmount adapter on a suitable microscope or optical device. 8. Models with the letters TW have the macro zoom function. SOFTWARE INTERFACE DINOCAPTURE / WINDOWS There are five key sections in the DinoCapture software: 1. MENU BAR 2. IMAGE LIST TOOLS 3. PREVIEW WINDOW MANAGEMENT BAR 4. TOOL BAR 5. PREVIEW WINDOW TOOLS MENU BAR Folder – create folders or access existing folders.
Switzerland IMAGE LIST TOOLS Open – open a picture selected from the image thumbnail gallery below the image list tool bar. Copy – copy a selected picture to the windows clipboard. Save as – save selected picture(s) to the desired file format or folder. E-mail – attach the selected picture(s) to a new message opened in your default e-mail client. Print – print the selected picture. Slideshow – run a slideshow of the selected pictures.
Switzerland Measurement tools – Many different measurement types can be done with the measurement tools. The double flash icon gives you access to the grid and ruler settings. Notice: The measurement and calibration feature is only available for certain models. For the DinoEye models, it is recommended to make calibrated measurements only. LINE Left click and drag to the desired length, and click again to finish.
Switzerland THREE POINT ANGLE Start at the pivot point and extend out to start measuring an angle. FOUR POINTS ANGLE Select two points from one line segment and another two points from another line segment to complete the angle measurement. CENTER DISTANCE After drawing at least two circles, select the icon and the mouse pointer will change to a pointing finger for selectable circles. Click on each circle and the software will measure the distance.
Switzerland Measurement options MEASUREMENT PROPERTIES Organize and show the status of all the measurements as well as the ability to adjust how the results are shown on the image. MAGNIFIER Digitally enlarge the area around your mouse pointer for more details and accurate measurements. MAGNIFICATION Input the magnification in the blue box. The magnification can be read from the dial on the microscope. UNITS Select the unit of measurement, inch, mil, m or um.
Switzerland LED control - Lets you turn ON/OFF or switch LED’s on the Dino-Lite (most models). Setting - The setting window allows you to control the camera settings. Maximize - Lets you see the live video or picture in full screen. To exit full screen mode, click anywhere on the screen or press “ESC”. Close window - Allows you to close the current window Snapshot - Take a picture.
Switzerland Click on the grey bar on the bottom of the preview window and the annotation box will expand. Write text within this box and press ENTER to start a new line. When done, left click anywhere in the preview window to save the annotation and exit the annotation box. Focus strength indicator - Indicates the level of focus achieved (available on certain models only) SOFTWARE INTERFACE DINOXCOPE / MAC There are four main sections in the DinoXcope program window: 1. Action bar Make picture.
Switzerland 3. Live image • Use the action bar for the action that you want to perform • Use the Controls menu (the menu bar is on top of the screen) to change settings, use (digital) zoom, freeze the image, change the resolution or change the functioning of the Microtouch button. • Use the Live measurement function (in the Tools menu) to open a special selection window for drawing and measurement tools. After selection, click okay and use the tool on the live image. 4.
Switzerland WARRANTY The DinoCapture software is provided for use with a Dino-Lite digital microscope supplied by AnMo Electronics or one of its distributors or resellers. The use of the DinoCapture software is guided by the End User License Agreement. The Dino-Lite product is delivered with a two year warranty from the date of purchase by the end customer. Please note that accessories (i.e. detachable caps/extensions) are not covered under warranty.