User manual

www.ideal-tek.com
Switzerland
4
The DinoCapture and DinoXcope software is licensed from Anmo Electronics
Corporation and is subject to an End User License Agreement (EULA) that
users will have to accept during the installation process.
Important notice: DO NOT connect the USB cable of the Dino-Lite
to the PC before installing the software.
1. Use the CD delivered with your Dino-Lite to install the DinoCapture and
DinoXcope software and drivers. Alternatively, download and run the lat-
est version of the software from the download section of the website:
www.dino-lite.com.
2. Click ‘Next’ and the Installshield wizard will start. (An ‘Open File-security
warning’ may appear on some systems. Select ‘Run’ or ‘YES’). Choose
the language you want for the DinoCapture 2.0 interface.
3. Read the User License Agreement. If you agree, press ‘Yes’ to continue or
press ‘No’ to stop the installation.
4. Select a destination folder for the DinoCapture software. When done,
press ‘Next’. Click ‘Install’ to start installing the software. If the Windows
security warning message appears, click ‘Install this driver software any-
way’.
5. When the installation is complete, selecting ‘Finish’ completes the soft-
ware installation.
6. The DinoCapture software has an auto-update feature that will check for
software updates when you start DinoCapture.
7. A full manual can be found in the help function of DinoCapture, as a pdf
on the CD.
HARDWARE INSTALLATION
1. After full installation of the DinoCapture software and driver package,
connect the Dino-Lite to one of the USB ports of your computer.
Dino-Lite User manual
SOFTWARE INSTALLATION
ENGLISH