www.dino-lite.
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Anmo Electronics Corporation, of 5F-1, No. 76, Sec. 2, Tung-Da Rd., Hsinchu 300, Taiwan, declare under our sole responsibility that the product, WF-10 to which this declaration relates, complies with Part 15 of the FCC Rules.
System Requirement Operating System ● iOS 6.x or later ● Android 4.1.1 or later Compatible Dino-Lite Digital Microscope ● Dino-Lite Edge series with USB interface ● Dino-Lite Premier (R4) series with USB interface Note: Few above-mentioned models may not be compatible with WF-10, for example AM3715TB, please consult with your dealer if you have questions.
Product Overview and Function 1 2 4 5 6 7 8 3 9 1. Battery Holder – A chamber for battery access and installation 2. Battery Cover - This cover protects the battery falling from WF-10 device. 3. 5V DC Input Jack – This is used for the DC power input. Plug in ONLY the included power adapter for power supplied or battery powered. 4. USB Interface – A dedicated USB interface for connecting Dino-Lite microscope 5.
LED Indicators LED Color Power Indicator Wi-Fi Indicator Battery Indicator Status Description No light Off The device is powered off or otherwise is not getting power. Green Solid The device is powered on and fully charged. No light Off; and the Power Indicator is also off The device is powered off or otherwise is not getting power. Green Solid The device is powered on but is not transmitting or receiving data. Green Blinking The device is transmitting or receiving data.
Using the WF-10 with Dino-Lite Preparation before use 1. Insert the small end of the adapter into the connector labeled 5V DC on the side of the WF-10. 2. Connect the Dino-Lite to the USB port labeled Dino-Lite. 3. Slide the power switch to the ON position, the LED indicators of WF-10 and Dino-Lite will light up. 4. Do not access the DinoConnect Application until all LED indicators of WF-10 and Dino-Lite light up. 5.
DinoConnect App Operation With the Dino-Lite plug in and wireless network configured correctly, launch the DinoConnect App on your wireless devises, it will start displaying a live image. 1 2 6 5 7 4 No. Function 3 Description 1 LED On/Off Switch Tapping this button to turn on/off Dino-Lite’s LED light. 2 Exposure Control Simply provide an exposure time scale allowing additional exposure by dragging the scale rightward.
Specifications of WF-10 Operation Temperature 0°C ~ 40°C Frequency 2.4G Hz band width Unit Dimensions 120mm (L) x 55.
