User Manual

LED Indicators
Tips to use Battery with WF-10
Power
Indicator
No light
Green
No light
Green
Green
No light
Green
Green
Off
Solid
Off; and the Power
Indicator is also off
Solid
Blinking
Off
Solid
Pulsing
The device is powered off
or otherwise is not getting power.
The device is powered on
and fully charged.
The device is powered off
or otherwise is not getting power.
The device is powered on
but is not transmitting or receiving data.
The device is transmitting
or receiving data.
The device is powered off
or otherwise is not getting power.
When the battery is fully charged,
the battery LED is solid.
While the battery is charging
the battery LED is in pulsing position.
Wi-Fi
Indicator
Battery
Indicator
Status DescriptionLED Color
● Insert the battery straight into the battery holder. Be sure the side with label should
be facing down.
● Make sure to completely charge your battery for at least 8 hours before using the
WF-10 for the first time or when it has not been used in the last 12 months.
● The battery delivers up to 105 minutes of continuous use on a single charge.
● There are two ways to charge your WF-10's battery, through your wall outlet or a
USB connection. Charging the battery through the USB port is slower than charging
it with wall power.
● The WF-10 can work from its battery as portable mode without the need of a
connection to an outlet.
● When the battery voltage decreases, the power source is cutoff and the LED will go
out. When this happens, charge battery again for continued use.
● Remove the battery from the WF-10 if you plan long time to have the power adapter
plugged in and not to use it for portability. This will help with the battery life.
● The battery can be fully re-charged at least 500 times, but after long-term
use the battery performance will begin to decline.
5