User Manual

Using the WF-10 with Dino-Lite

Preparation before use

1. Insert the small end of the adapter into the connector labeled 5V DC on the

side of the WF-10.

2. Connect the Dino-Lite to the USB port labeled Dino-Lite.

3. Slide the power switch to the ON position, the LED indicators of WF-10 and

Dino-Lite will light up.

4. Do not access the DinoConnect Application until all LED indicators of

WF-10 and Dino-Lite light up.

In order to avoid the possibility of exceeding the FCC radio frequency exposure

limits, human proximity to the WF-10 shall not be less than 20cm (8 inches)

during normal operation.

Network Configuration

1. The FREE Dino-Lite mobile application “DinoConnect” is available to

download for your wireless devices through App Store for iOS version

or Google Play for Android version.

2. To configure your Wi-Fi network setting for use with the Dino-Lite, choose

“Settings” on your device and turn Wi-Fi On.

3. Selecting Network Name (SSID) “Dino-Lite WiFi Streamer” from wireless

network menu which opens a new screen and then input Password

12345678.

4. Pressing the Home button on your device to exit Settings.