User's Manual

Operating Instructions
Installation & Notice
1. Working principle
with digital dual-core fuzzy logic operative program-
ming and intelligent analysis, it accurately detects hu-
man body movement with infrared sensor and sends
signal to main panel.
2. Pairing with main panel by App
①
Scan the QR code on the sensor.
②
The pairing result would be confirmed in App.
3. Product testing
①
Power on, LED indicator would flash for 1s.
It takes about 30s for self-check.
②
To verify this product is installed properly,
please walk in the sensing area to test.
Pull out the battery insulating strip.
Pairing it with main panel by App before installing.
Fix the bracket with screws on wall, connect the sensor to bracket,
adjust a proper angle.
Mount 1.8m - 2.4m above floor level.
Make sure there is no inducement for pet to pass by, like stair and etc.
Avoid installing the sensors in area of our door, air-condition nearby, direct
sunshine, heat source and under the rotating objects.
Please install and use the sensor according to this manual, don’t touch the
surface of sensor for avoiding affecting the sensitivity of the sensor.For cleaning,
power off this product then clean with a suitable degreaser agent. In order to
ensure normal work, the power should be kept to supply and get on walking test
periodically, once a week is better.
PCB Layout
Detective Interval Time
Setting Switch
(every 5s. or 5min.)
On/O Switch
Infrared Sensor
Detecting Area View (top view)
+6m
-6m
100°
Detecting Area View (side view)
Features
Parameters
Appearance
The wireless pet-immune motion sensor is an accessory of smart alarm system. It accurately detects human body movement
and eectively avoids false alarms caused by pets. Featured with automatic temperature compensation technology, it ensures
high intelligence, sensitivity, and stability. It has modern and elegant appearance. With the technology like energy saving and
low battery warning
，
it’s easy to set up and use.
• Working Voltage DC 3V
• Battery 2 × AA battery(1.5V)
• Working Current ≤40mA
• Standby Current ≤20μA
• Detective Range 100°
• Detective Distance 9m
• Immunity of pets Weight
：
≤20KG
• Transmission Distance Up to 300m without obstacle
• Transmission Frequency 433.92MHz
• Working Temperature -10
℃
~50
℃
• Humidity ≤90%rh (non-condensing)
• Weight 66g (battery not included) 112g (battery included) 62.3g (Bracket)
• Dimension 99.6mm*54.0mm*40.2mm L*W*H(±0.1mm)
Detection Window
Magnetic Slice
Stainless-steel Bead
LED Indicato
r
Bracket
3.9 6 10.4 15
4m
2.1m
15m2.1
3.1
5.9
Test