User's Manual
Pairing with Main PanelFeatures
Parameters
Appearance
The remote controller is an accessory of series smart alarm system. It helps you quickly arm/disarm/home arm/trigger SOS
the system.
It’s small and exquisite, convenient for carrying out on keychain or in pocket/bag.
• Working Voltage DC 3V
• Battery 1 × CR2032 button battery (3V)
• Working Current ≤40mA
• Standby Current ≤0.2uA
• Transmission Distance Up to 150m without obstacle
• Transmission Frequency 433.92MHz
• Working Temperature -10
℃
~50
℃
• Humidity ≤90%rh (non-condensing)
• Weight 16.4g (battery included)
• Dimension 58.0mm*33.1mm*11.0mm L*W*H(±0.1mm)
LED Indicator
Arm
Home Arm
Cover for Battery
Disarm
SOS
Keychain
PCB Layout
1× CR2032
Button Battery
CR2032
Operating Clarification
①
Scanning the QR Code for Pairing.
②
The pairing result would be confirmed on App.
Learn Mode
①
Launch the App for turn on Learn Mode.
②
Follow the guideline in App to trigger the accessory for the system to learn.
③
The pairing result would be confirmed in App.
Hint: How to trigger
①
Press any button of the remote controller.
• Arm
Press , the LED indicator lights on, the system enters armed status.
• Home Arm
Press , the LED indicator lights on, the system enters home armed status.
• Disarm
Press , the LED indicator lights on, the system enters disarmed status.
• SOS
Press , the LED indicator lights on, the system immediately enters emergent alarming status.