User's Manual

Operating Instructions
Installation & Notice
PCB Layout
Features
Parameters
Appearance
This sensor has two shock tubes which can detected the subtle vibration. Once the vibration exceeds the safety threshold, a
wireless signal would be sent to the alarm system. It could be used for protecting your windows or doors from gross attacking
by intruders.
• Working Voltage DC 3V
• Battery 1 × CR2032 button battery (3V)
• Working Current ≤40mA
• Standby Current ≤2μA
• Transmission Distance Up to 300m without obstacle
• Transmission Frequency 433.92 MHz
• Working Temperature -10
℃
~50
℃
• Humidity ≤90%rh (non-condensing)
• Weight 35.5g(battery not included) 40g(battery included)
• Dimension 80.0mm*38.2mm*13.3mm L*W*H
LED flashes once: Door/window is opened and transmitter sends signal to the main panel.
The LED indicator will light up every 1 second in the event of low battery. Please replace the battery in time. Push
notification will be sent to your APP.
LED Indicator
1. Working principle
The transmitter sends trigger signal to paired main panel when the sensor detects vibration.
2. Pairing with main panel
Scanning the QR Code for Pairing
①
Scan the QR code on this accessory by App.
②
The pairing result would be conrmed in App.
Learn Mode
①
Launch the App for turn on Learn Mode.
②
Follow the guideline in App to trigger the accessory for the system to learn.
③
The pairing result would be conrmed in App.
Hint: How to trigger
①
Remove the battery insulating sheet.
②
Knock the sensor until the red LED indicator lights up.
• Pull out the battery insulative strip.
• Pairing with main panel by App before installing.
• Attach the sensor with the double-side sticky tape to safes, drawers, doors and windows.
LED Indication