Instructions

www.getdio.com
EN | 6
6 Finish by securing the motor head using the pin supplied.
7 Ret the shutter onto the roller in accordance with the instructions for your shutter or blind,
taking care that the power cable or antenna does not impede it from rolling up.
Warning, if the shutter is attached with screws, ensure that the screws are not long enough to
touch the motor inside the roller.
Connection to the power supply must be undertaken by a qualied electrician.
Warning, disconnect the power supply before you start working.
Warning, if the power cable is damaged, the product must not be used and must be replaced. In
this case, contact DiO customer service.
II. Connecting to the power supply