Manual

1.877.817.6028
www.DiodeLED.com
[e-mail] www.DiodeLED.com
INSTALLATION GUIDE
2 OF 5
DMX WIFI WALL MOUNT ZONE LED CONTROLLER
®
Remote Operaon
The DMX controller can also be controlled remotely via WiFi with a
compable IOS/Android tablet or mobile device using the applicaon
‘EasyColor Pro.’
Save Funcon
Up to 16 total stac colors can be saved, 4 colors per zone. To save a color:
1. Choose a zone to operate in (1, 2, 3, or 4).
2. Select a color to save by using the color wheel or by adjusng each
R, G, B, and W seng.
3. Once the desired color is visible, long press the ‘S’ key unl the blue
indicator light on the controller ashes red.
4. Short press 1, 2, 3, or 4 to save the color. LEDs will ash once save is
complete.
5. To achieve your saved color:
a. Choose the zone to operate in (1-4).
b. Short press the ‘S’ key.
c. Short press the number the color was saved in (1-4).
Zone Control
Short press to control zones 1-4.
Long press to turn individual zone
ON/OFF.
Dynamic Modes
Short press switches mode/pauses
mode.Long press adjusts speed of
dynamic mode. See ‘Dynamic Mode
Chart’ for mode descripons.
RGBW Control
Short press to turn ON/OFF Red,
Green, Blue, White.
Long press to adjust brightness of
individual R,G,B,W color.
Color Wheel
Scroll to find specified color.
Save Funcon
Saves single colors. See below for
more details.
Power
Short press to turn ALL zones and
channels ON/OFF.
Long press to adjust brightness of
CURRENT zone RGB colors
simultaneously. Adjust W channel
seperately to adjust tone.
Wiring Connections
Mounting
Operation
DO NOT connect directly to 120VAC.
See ‘System Diagram’ for a general system design.
Pop o faceplate with
a athead screwdriver.
Install with the included SQUARE-PRO™ Juncon Box.
Box dimensions: 2.83 x 1.89 x 2.83 in. (L x D x H)
GND
Data +
Data -
Vin (V+)
GND (V-)
To DMX Decoder
or DMX Fixture
From 12-24V Driver
Reset
Switch
IG061814-1.2