User guide

1 OF 4
INSTALLATION SHEET
Before you begin, read all warnings and installaon instrucons thoroughly.
Safety & Warnings
• This product is intended to be installed and serviced by a qualied, licensed electrician.
• Install in accordance with the Naonal Electric Code, and local regulaons.
• Do not connect directly to high voltage 120V AC power. Only power with a compable 12-24V DC constant voltage driver.
• Ensure applicable wire is installed between driver, xture, and any controls in between. When choosing wire, factor in voltage drop, amperage rang,
and type (in-wall rated, wet locaon rated, etc.). Inadequate wire installaon could overheat wires and cause re.
• This product is rated for indoor installaon and is not protected against moisture.
• Do not disassemble or modify this product beyond the instrucons in this guide or the warranty will be voided.
• Ulize the wiring diagrams in this installaon guide for basic installaons. For more complex installaons, please contact technical support.
DMX 4-ZONE WIFI CONTROLLER
• RJ45 Splice Cable
• RJ45 Coupler
• Square-Pro Juncon Box
Remote Operaon
The DMX controller can also be controlled remotely via WiFi with a
compable IOS/Android tablet or mobile device using the applicaon
‘EasyColor Pro.’
Please see the DMX controller product web
page for ‘EasyColor Pro’ instrucons.
Save Funcon
Up to 16 total stac colors can be saved, 4 colors per zone. To save a color:
1. Choose a zone to operate in (1, 2, 3, or 4).
2. Select a color to save by using the color wheel or by adjusng each
R, G, B, and W seng.
3. Once the desired color is visible, long press the ‘S’ key unl the blue
indicator light on the controller ashes.
4. Short press 1, 2, 3, or 4 to save the color. LEDs will ash once save is
complete.
5. To achieve your saved color:
a. Choose the zone to operate in (1-4).
b. Short press the ‘S’ key.
c. Press the number the color was saved in (1-4).
Operaon Overview
Zone Control
Short press to control zones 1-4.
Long press to turn individual
zone ON/OFF.
Dynamic Modes
Short press switches
mode/pauses mode.
Long press adjusts
speed of dynamic mode.
RGBW Control
Short press to turn ON/OFF Red,
Green, Blue, White.
Long press to adjust brightness
of individual R,G,B,W color.
Color Wheel
Scroll to find specified color.
Save Function
Saves single colors. See
below for more details.
Power
Short press to turn ALL zones
and channels ON/OFF.
Long press to adjust bright-
ness of CURRENT zone RGB
colors simultaneously. Adjust
W channel seperately to
adjust tone.
Included Items