Manual
2
Mobile Software Installation
Creating a Wi-Fi Network Password
Android Software Installation
1. Go to the Google Play Store on your mobile device and search for the application WIFI-102.
2. Download the free application.
3. The application is now ready to be paired with your Wi-Fi LED Controller through the Wi-Fi settings on your Android device.
Apple iOS Software Installation
1. Go to the Apple App Store on your mobile device and search for the application WIFI-102.
2. Download the free application.
3. The application is now ready to be paired with your Wi-Fi LED Controller through the Wi-Fi settings on your Apple device.
Setting up the Wi-Fi Network (Android & Apple iOS)
1. Power up your Wi-Fi LED Controller and set the SSID number (0-F). The RUN indicator will blink rapidly for 25 seconds until initialization is
complete.
2. Go to the Settings of your mobile device and turn on the Wi-Fi.
3. The wireless network of the LED Controller should show up once initialization is complete and will appear as ‘WIFI-102-SSID-X’. X is the
chosen numerical value (0-F).
4. Connect to the controller Wi-Fi network and the application is ready for use.
The Wi-FI LED Controller can be paired and controlled with any mobile/tablet device that supports Android 2.1 and above or Apple’s iOS 4.3 and above.
For Mobile Software Operating Instructions, see page 4.
1. Power up the Wi-Fi LED Controller.
2. Using your computer or mobile device, connect to the Wi-Fi Controller wireless network (eg. WIFI-1-1-SSID-1).
3. Open your browser, and input “http://10.10.100.254” in the address eld and press search (Fig. 1).
4. Fill in the user name and password in the Authentication elds (Fig. 2) to be directed to the “Working Mode Conguration” page (Fig. 3). The default value
for both authentication elds is “admin”.
5. Click “AP Interface Settings.” Here, you can change the Wi-Fi network name (Step 6) and password (Step 7) (Fig. 4).
6. To personalize the network name, click the “Network Name (SSID)” eld and change to your preference. Once complete, click “Apply”.
7. To apply a password to the network, go back to “AP Interface Settings” and click the drop-box next to “Security Mode” and select “WPA2-PSK”. Enter a
password in “Pass Phrase” and click “Apply.”
A minimum of 8 values must be entered when creating a password as many computer/mobile devices require an 8-value key. Failing to enter an 8-value key
will permanently lock the user out of the Wi-Fi Receiver unless the device is RESET to factory settings. See RESET to Factory Settings
To nalize your settings, click “Device Management” (Fig. 5). Here you can change the Administrator Settings by setting a new Account Name and Password.
Once complete, click “Restart Module” and wait for your device to reboot. Click on the Wi-Fi settings of your device to see if the changes have applied.
RESET to Factory Settings
If locked out of the Wi-Fi Controller network or the password has been forgotten, reset the Wi-Fi Controller by pressing “ON/OFF” and “SCENE” simultaneously
for 3 seconds until the device beeps. The device is now RESET.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5