Manual

4
Color-Changing RGB Installation
To install an RGB LED xture, connect the red lead to the negative (R) terminal; the green lead to the negative
(G) terminal; & the blue lead to the negative (B) terminal of the controller. Connect the remaining positive lead
to the positive (V+) terminal of the controller.
Color Temperature (CT) Adjustable Installation
It is recommended to install a 2700k LED xture for every 5000k xture and mount the separate xtures
parallel to each other. The CT controller application can then adjust the combined light output of the LED
xtures to achieve a custom color temperature between 2700k-5000k. To install, connect the negative (-)
lead of the 2700k xture to the negative (WW) terminal of the controller. Next, attach the negative (-) lead
of the 5000k xture to the negative (W) terminal of the controller. The remaining positive (+) leads of each
xture must be tied together and connected to the single positive (V+) terminal of the controller.
V+
Warm White Fixture
RGB Color Changing Strip Light
Cool White Fixture
X
V-
V-
120V AC
120V AC
Wi-Fi
Controller
Wi-Fi
Controller
Wi-Fi
Controller
V+
BLUE
GREEN
RED
Dimmable (DIM) Single-Color Installation
Up to 3 separate single color LED xtures can be directly connected to the Wi-Fi LED Controller’s terminal
block and dimmed over the wireless network with your mobile remote. Connect each negative lead of your
single color xtures to each separate negative (W) terminal. The remaining positive leads of your single
color xtures must be tied together and connected to the single positive (V+) terminal.
V+
V-
V-
V-
12V~24V DC
Driver
12V~24V DC
Driver
12V~24V DC
Driver
120V AC
Connecting your DC12V~DC24V Constant Voltage Driver to the Wi-Fi LED Controller
The Wi-Fi LED Controller must be powered with a compatible DC12V~DC24V constant voltage driver. Please contact our customer service team or visit the Wi-Fi
LED Controller product page for a list of compatible drivers.
To connect your driver, attach the negative output lead of your driver to the negative (-) input terminal of the controller and positive output lead of your driver to
the positive (+) input terminal of the controller.
Wiring Diagrams & Conguration
+
–
+
–
+
–
Note: The lead marked for NC is
non functional in this mode.