Datasheet

BCR420UW6 / BCR421UW6
Document number: DS37667 Rev. 3 - 2
10 of 13
www.diodes.com
November 2015
© Diodes Incorporated
BCR420UW6 / BCR421UW6
Application Information (Continued)
PWM dimming can be achieved by driving the EN pin. Dimming is achieved by turning the LEDs ON and OFF for a portion of a single cycle. The
PWM signal can be provided by a micro-controller or analog circuitry; typical circuit is shown in Figure 3. Figure 4 is a typical response of LED
current vs. PWM duty cycle on the EN pin.
Figure 3 Application Circuits for LED Driver with PWM Dimming Functionality
Figure 4 Typical LED Current Response vs. PWM Duty Cycle for
400Hz PWM Frequency