User Manual

Advance Datasheet
1.0A High-side Power Distribution Switch with Enable and Flag AP2810
Jul. 2012 Rev 1. 2 BCD Semiconductor Manufacturing Limited
2
Pin Configuration
M/MM Package
（SOIC-8/MSOP-8）
Figure 2. Pin Configuration of AP2810 (Top View)
Pin Descriptions
Pin Number Pin Name Function
1 GND Ground
2, 3 VIN Supply input pin
4
Chip enable control input, active low or high
5
Fault flag pin, output with open drain, need a pull-up resistor in
application, active low to indicate OCP or OTP
6, 7, 8 VOUT Switch output voltage