Instruction Manual

ManualsBrandsDiodes ManualsHardwareDXT2010P5

DXT2010P5

Document number: DS32011 Rev. 2 - 2

1 of 7

www.diodes.com

March 2010

DXT2010P5

PowerDI is a registered trademark of Diodes Incorporated.

ADVANCE INFORMATION

Product Line o

Diodes Incorporated

60V NPN MEDIUM POWER TRANSISTOR

PowerDI

Features

• 43% smaller than SOT223; 60% smaller than TO252

• Maximum height just 1.1mm

• Rated up to 3.2W

• V

CEO

= 60V

• I

= 6A; I

= 20A

• Low Saturation voltage

• Lead, Halogen and Antimony Free, RoHS Compliant (Note 1)

• “Green” Device (Note 2)

Applications

• Motor driver

• Regulator circuit

Mechanical Data

• Case: PowerDI

• Case Material: Molded Plastic, “Green” Molding Compound.

UL Flammability Classification Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020

• Terminals: Finish – Matte Tin annealed over Copper leadframe.

Solderable per MIL-STD-202, Method 208

• Weight: 0.093 grams (approximate)

Ordering Information (Note 3)

Part Number Case Packaging

DXT2010P5-13 PowerDI

5 5000/Tape & Reel

Notes: 1. No purposefully added lead. Halogen and Antimony Free.

2. Diodes Inc’s “Green” Policy can be found on our website at http://www.diodes.com

3. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.

Marking Information

Top View Bottom View Pin-out diagram

Device Schematic

DXT2010 = Product Type Marking Code

= Manufacturers’ Code Marking

K = Factory Designator

YYWW = Date Code Marking

YY = Last Two Digits of Year (ex: 09 for 2009)

WW = Week code (01 to 53)

YYWWK

DXT2010

Summary of content (7 pages)

PAGE 1
A Product Line of Diodes Incorporated DXT2010P5 ADVANCE INFORMATION 60V NPN MEDIUM POWER TRANSISTOR PowerDI®5 Features Mechanical Data • • • • • • • • • • 43% smaller than SOT223; 60% smaller than TO252 Maximum height just 1.1mm Rated up to 3.2W VCEO = 60V IC = 6A; ICM = 20A Low Saturation voltage Lead, Halogen and Antimony Free, RoHS Compliant (Note 1) “Green” Device (Note 2) • • • ® Case: PowerDI 5 Case Material: Molded Plastic, “Green” Molding Compound.
PAGE 2
A Product Line of Diodes Incorporated DXT2010P5 ADVANCE INFORMATION Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Symbol VCBO VCEO VEBO IC ICM Value 150 60 7 6 20 Unit V V V A A Symbol PD RθJA PD RθJA PD RθJA RθJT TJ, TSTG Value 3.2 39 1.7 75 0.74 169 5.
PAGE 3
A Product Line of Diodes Incorporated DXT2010P5 1 DC 1s 100ms 10ms 1ms Single Pulse. T amb=25°C 100µs See note 3 10m 100m 1 10 100 VCE Collector-Emitter Voltage (V) Max Power Dissipation (W) IC Collector Current (A) 10 Limited 100m 3.0 2.5 See note 3 2.0 See note 4 1.5 See note 5 1.0 0.5 0.0 0 25 See note 3 30 D=0.5 20 D=0.2 Single Pulse 10 D=0.05 0 100µ D=0.1 1m 10m 100m 1 10 100 1k Pulse Width (s) 125 150 175 Single Pulse.
PAGE 4
A Product Line of Diodes Incorporated DXT2010P5 ADVANCE INFORMATION Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 7) Emitter-Base Breakdown Voltage Collector Cutoff Current Collector Cutoff Current Emitter Cutoff Current Symbol V(BR)CBO V(BR)CEO V(BR)EBO Min 150 60 7.0 Typ 190 80 8.1 ICBO ⎯ ⎯ ICER R≤1kΩ IEBO ⎯ ⎯ Max ⎯ ⎯ ⎯ 20 0.5 Unit V V V nA μA nA μA nA ⎯ ⎯ 20 0.
PAGE 5
A Product Line of Diodes Incorporated DXT2010P5 1 0.6 Tamb=25°C VCE(SAT) (V) VCE(SAT) (V) 0.5 100m IC/IB=50 IC/IB=20 10m 10m 100m 1 0.4 100°C 0.3 25°C 0.2 -55°C 0.0 1m 10 IC Collector Current (A) IC/IB=10 0.1 IC/IB=10 1m 10m 200 25°C 150 100 -55°C 0.4 50 0.2 0.0 1m 10m 100m 1 10 0 10 1.4 1.2 -55°C 1.0 25°C 0.8 0.6 0.4 1m IC Collector Current (A) h FE v IC 1.4 1 IC/IB=10 100°C 0.6 10 1.6 VBE(SAT) (V) Normalised Gain 250 1.0 0.
PAGE 6
A Product Line of Diodes Incorporated DXT2010P5 ADVANCE INFORMATION Package Outline Dimensions A ® PowerDI 5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm D D2 A2 b2 L E E2 E1 W L1 e b1 b1 A2 Suggested Pad Layout Z C E1 X2 X1 Y2 Value (in mm) 6.6 1.4 3.6 0.8 4.7 3.87 0.9 Y1 PowerDI is a registered trademark of Diodes Incorporated.
PAGE 7
A Product Line of Diodes Incorporated DXT2010P5 ADVANCE INFORMATION IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).