User guide

ManualsBrandsDiodes ManualsHardwareDXT2011P5

DXT2011P5

Document number: DS32069 Rev. 3 - 2

1 of 7

www.diodes.com

April 2012

DXT2011P5

POWERDI is a re

istered trademark of Diodes Incor

orated.

ADVANCE INFORMATION

A Product Line o

Diodes Incorporated

100V NPN LOW SAT MEDIUM POWER TRANSISTOR

POWERDI

Features

• 43% smaller than SOT223; 60% smaller than TO252

• Maximum height just 1.1mm

• Rated up to 3.2W

• BV

CEO

> 100V

• Maximum continuous current I

= 6A

• Low Saturation voltage

• Totally Lead-Free & Fully RoHS compliant (Note 1)

• Halogen and Antimony Free. “Green” Device (Note 2)

Applications

• Motor Drive

• Regulator circuit

Mechanical Data

• Case: POWERDI5

• Case Material: Molded Plastic, “Green” Molding Compound.

UL Flammability Classification Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020

• Terminals: Finish – Matte Tin annealed over Copper leadframe.

Solderable per MIL-STD-202, Method 208

• Weight: 0.093 grams (approximate)

Ordering Information (Note 3)

Part Number Case Packaging

DXT2011P5-13 POWERDI5 5000/Tape & Reel

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.

2. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)

and <1000ppm antimony compounds.

3. For packaging details, go to our website at http://www.diodes.com.

Marking Information

Top View

Bottom View

Pin-out diagram Device Schematic

DXT2011 = Product Type Marking Code

= Manufacturers’ Code Marking

K = Factory Designator

YYWW = Date Code Marking

YY = Last Two Digits of Year (ex: 09 for 2009)

WW = Week code (01 to 53)

POWERDI5

YYWWK

DXT2011

Summary of content (7 pages)

PAGE 1
A Product Line of Diodes Incorporated DXT2011P5 ADVANCE INFORMATION 100V NPN LOW SAT MEDIUM POWER TRANSISTOR POWERDI®5 Features Mechanical Data • • • • • • • • • • 43% smaller than SOT223; 60% smaller than TO252 Maximum height just 1.1mm Rated up to 3.2W BVCEO > 100V Maximum continuous current IC = 6A Low Saturation voltage Totally Lead-Free & Fully RoHS compliant (Note 1) Halogen and Antimony Free.
PAGE 2
A Product Line of Diodes Incorporated DXT2011P5 ADVANCE INFORMATION Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Symbol VCBO VCEO VEBO IC ICM Value 200 100 7 6 10 Unit V V V A A Value 3.2 1.7 0.74 39 75 169 5.
PAGE 3
A Product Line of Diodes Incorporated DXT2011P5 VCE(sat) Max Power Dissipation (W) IC Collector Current (A) 3.5 10 Limited 1 DC 1s 100ms 100m 10ms 1ms 100µs Single Pulse. T amb=25°C 50mmX50mm FR4 2oz Cu 10m 100m 1 10 100 VCE Collector-Emitter Voltage (V) 3.0 50mmX50mm FR4 2oz Cu 2.5 2.0 25mmX25mm FR4 1oz Cu 1.5 Minimum pad 1oz Cu 1.0 0.5 0.0 0 25 50mmX50mm FR4 2oz Cu 30 D=0.5 20 D=0.2 Single Pulse 10 D=0.05 0 100µ D=0.
PAGE 4
A Product Line of Diodes Incorporated DXT2011P5 ADVANCE INFORMATION Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 7) Emitter-Base Breakdown Voltage Min 200 100 7 − − − − − − − − − − − hFE Transition Frequency Output Capacitance Collector Cutoff Current Symbol BVCBO BVCEO BVEBO Typ 235 115 8.1 − − − − − Max − − − 20 0.
PAGE 5
A Product Line of Diodes Incorporated DXT2011P5 0.6 1 Tamb=25°C VCE(SAT) (V) VCE(SAT) (V) IC/IB=10 0.5 IC/IB=50 100m IC/IB =20 IC/IB=10 0.4 100°C 0.3 25°C 0.2 0.1 -55°C 10m 1m 10m 100m 1 0.0 1m 10 IC Collector Current (A) 10m 100m 1 10 1 10 IC Collector Current (A) VCE(SAT) v IC VCE(SAT) v IC 250 200 1.0 0.8 150 25°C 0.6 100 0.4 -55°C 50 0.2 0.0 1m 10m 100m 0 10 1 IC/IB=10 1.2 VBE(SAT) (V) 100°C Typical Gain (hFE) Normalised Gain 1.4 VCE=2V 1.2 1.
PAGE 6
A Product Line of Diodes Incorporated DXT2011P5 ADVANCE INFORMATION Package Outline Dimensions A D D2 A2 b2 L E E2 E1 W L1 e b1 b1 A2 POWERDI5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm Suggested Pad Layout X Dimensions C G X X1 Y Y1 Y X1 (2x) Value (in mm) 1.840 0.852 3.360 1.390 4.860 1.
PAGE 7
A Product Line of Diodes Incorporated DXT2011P5 IMPORTANT NOTICE ADVANCE INFORMATION DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).