Owner manual

DXT696BK
Document number: DS36574 Rev. 1 - 2
2 of 7
www.diodes.com
December 2013
© Diodes Incorporated
DXT696BK
Absolute Maximum Ratings (@T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol Value Unit
Collector-Base Voltage
V
CBO
180 V
Collector-Emitter Voltage
V
CEO
180 V
Emitter-Base Voltage
V
EBO
7 V
Continuous Collector Current
I
C
0.5 A
Peak Pulse Current
I
CM
1 A
Peak Base Current
I
BM
0.5 A
Thermal Characteristics (@T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol Value Unit
Power Dissipation
(Note 5)
P
D
3.9
W
(Note 6) 2.1
(Note 7) 1.6
Thermal Resistance, Junction to Ambient Air
(Note 5)
R
θJA
32
C/W
(Note 6) 59
(Note 7) 80
Thermal Resistance, Junction to Leads (Note 8)
R
θJL
8.4
Thermal Resistance, Junction to Case (Note 9)
R
θJC
14.6
Operating and Storage Temperature Range
T
J
, T
STG
-55 to +150
C
ESD Ratings (Note 10)
Characteristic Symbol Value Unit JEDEC Class
Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A
Electrostatic Discharge - Machine Model ESD MM 400 V C
Notes: 5. For a device mounted with the exposed collector pad on 50mm x 50mm 2oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured
under still air conditions whilst operating in a steady-state.
6. Same as note (5), except mounted on 25mm x 25mm 1oz copper.
7. Same as note (5), except mounted on minimum recommended pad (MRP) layout.
8. Thermal resistance from junction to solder-point (on the exposed collector pad).
9. Thermal resistance from junction to the top of the case.
10. Refer to JEDEC specification JESD22-A114 and JESD22-A115.