Owner's manual

DXTP560BP5
Datasheet Number: DS35054 Rev: 1 - 2
2 of 7
www.diodes.com
January 2011
© Diodes Incorporated
DXTP560BP5
POWERDI is a registered trademark of Diodes Incorporated.
ADVANCE INFORMATION
A
Product Line o
f
Diodes Incorporated
Maximum Ratings @T
A
= 25°C unless otherwise specified
Characteristic Symbol Limit Unit
Collector-Base Voltage
V
CBO
-500
V
Collector-Emitter Voltage
V
CEO
-500
Emitter-Base Voltage
V
EBO
-7
Continuous Collector Current (Note 4)
I
C
-150
mA
Peak Pulse Current
I
CM
-500
Thermal Characteristics @T
A
= 25°C unless otherwise specified
Characteristic Symbol Value Unit
Power Dissipation
Linear Derating Factor
(Note 4)
P
D
2.8
22.4
W
mW/°C
(Note 5)
1.3
10.4
(Note 6)
0.7
5.6
Thermal Resistance, Junction to Ambient
(Note 4)
R
θ
JA
45
°C/W
(Note 5) 96
(Note 6) 179
Thermal Resistance, Junction to Lead (Note 7)
R
θ
JL
14 °C/W
Operating and Storage Temperature Range
T
J
, T
STG
-55 to +150 °C
Notes: 4. For a device surface mounted on 50mm x 50mm x 1.6mm FR4 PCB with high coverage of single sided 2oz copper, in still air conditions; the device is
measured when operating in a steady-state condition. The entire exposed collector pad is attached to the heatsink.
5. Same as note (4), except the device is mounted on 25mm x 25mm 1oz copper.
6. Same as note (4), except the device is mounted on a minimum recommended pad layout of 1oz copper.
7. Thermal resistance from junction to solder-point (at the end of the collector lead).