Owner's manual

ManualsBrandsDiodes ManualsHardwarePDS1040L

POWERDI is a registered trademark of Diodes Incorporated.

PDS1040L

Document number: DS30486 Rev. 12 - 2

1 of 5

www.diodes.com

October 2012

PDS1040L

10A LOW VF SCHOTTKY BARRIER RECTIFIER

POWERDI

Features

• Guard Ring Die Construction for Transient Protection

• Very Low Forward Voltage Drop

• High Forward Surge Current Capability

• For Use in Low Voltage, High Frequency Inverters, Free

Wheeling, and Polarity Protection Applications

• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)

• Halogen and Antimony Free. “Green” Device (Note 3)

• Qualified to AEC-Q101 Standards for High Reliability

Mechanical Data

• Case: POWERDI5

• Case Material: Molded Plastic, “Green” Molding Compound. UL

Flammability Classification Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020

• Terminals: Finish – Matte Tin annealed over Copper leadframe.

Solderable per MIL-STD-202, Method 208

• Polarity: See Diagram

• Weight: 0.096 grams (approximate)

Ordering Information (Note 4)

Part Number Case Packaging

PDS1040L-13 POWERDI5 5000/Tape & Reel

PDS1040L-7 POWERDI5 1500/Tape & Reel

Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.

2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and

<1000ppm antimony compounds.

4. For packaging details, go to our website at http://www.diodes.com.

Marking Information

Top View

Bottom View

LEFT PIN

RIGHT PIN

Note: Pins Left & Right must

be electrically connected

at the printed circuit board.

BOTTOMSIDE

HEAT SINK

S1040L = Product type marking code

= Manufacturers’ code marking

YYWW = Date code marking

YY = Last two digits of year (ex: 04 for 2004)

WW = Week code (01 - 53)

K = Factory designator

YYWWK

S1040L

POWERDI5

Green

Summary of content (5 pages)

PAGE 1
PDS1040L Green 10A LOW VF SCHOTTKY BARRIER RECTIFIER POWERDI® Features Mechanical Data • • • • • • • • • Guard Ring Die Construction for Transient Protection Very Low Forward Voltage Drop High Forward Surge Current Capability For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free.
PAGE 2
PDS1040L Maximum Ratings (@TA = +25°C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (see also Figure 5) Non-Repetitive Peak Forward Surge Current 8.
PAGE 3
PDS1040L 100 IF, INSTANTANEOUS FORWARD CURRENT (A) PD, POWER DISSIPATION (W) 4 3 10 TJ = 150°C 1 TJ = 125°C 100m 2 1 0 0 TJ = 100°C 10m TJ = 85°C 1m TJ = 25°C TJ = -65°C 12 6 9 15 3 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation 0 100 200 300 500 600 400 VF, INSTANTANEOUS FORWARD VOLTAGE (mV) Fig. 2 Typical Forward Characteristics IR, INSTANTANEOUS REVERSE CURRENT (mA) 1,000 100n 10n 1n 100ρ 0 10 1.0 0 40 10 20 30 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig.
PAGE 4
TA, DERATED AMBIENT TEMPERATURE (°C) PDS1040L 170 150 130 110 90 70 50 30 10 -10 -30 0 10 20 30 VR, DC REVERSE VOLTAGE (V) Fig. 7 Operating Temperature Derating 40 Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. A ® D D2 A2 b2 L E E2 E1 W L1 e b1 b1 A2 POWERDI 5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.
PAGE 5
PDS1040L IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein.