Manual

SBR02U30LP
Document number: DS31715 Rev. 2 - 2
1 of 4
www.diodes.com
July 2009
© Diodes Incorporated
SBR02U30LP
SBR is a registered trademark of Diodes Incorporated.
NEW PRODUCT
0.2A SBR
®
SUPER BARRIER RECTIFIER
Features
• Ultra Low Forward Voltage
• Excellent High Temperature Stability
• Patented Super Barrier Rectifier Technology
• Soft, Fast Switching Capability
• Lead Free Finish, RoHS Compliant (Note 1)
• “Green” Molding Compound (No Br, Sb)
• Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
• Case: DFN1006-2 (Equivalent to SOD-882)
• Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
• Polarity Indicator: Cathode Dot
• Terminals: Finish - NiPdAu over Copper leadframe. Solderable
per MIL-STD-202, Method 208
• Marking Information: See Page 3
• Ordering Information: See Page 3
• Weight: 0.001 grams (Approximate)
Maximum Ratings @T
A
= 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V
RRM
V
RWM
V
RM
30 V
Average Rectified Output Current (See Figure 1)
I
O
0.2 A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I
FSM
5.0 A
Thermal Characteristics
Characteristic Symbol Value Unit
Typical Thermal Resistance
Thermal Resistance Junction to Soldering (Note 2)
Thermal Resistance Junction to Ambient (Note 3)
R
θ
JS
R
θ
JA
18
263
ºC/W
Operating and Storage Temperature Range
T
J
, T
STG
-65 to +150 ºC
Electrical Characteristics @T
A
= 25°C unless otherwise specified
Characteristic Symbol Min Typ Max Unit Test Condition
Forward Voltage Drop
V
F
-
0.34
-
0.39
0.40
0.48
0.45
V
I
F
= 0.1A, T
J
= 25ºC
I
F
= 0.2A, T
J
= 25ºC
I
F
= 0.2A, T
J
= 125ºC
Leakage Current (Note 4)
I
R
-
4
0.5
50
10
µA
mA
V
R
= 30V, T
J
= 25ºC
V
R
= 30V, T
J
= 125ºC
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/quality/lead_free.html.
2. Theoretical R
θJS
calculated from the top center of the die straight down to the PCB cathode tab solder junction.
3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Short duration pulse test used to minimize self-heating effect.
Top View
Bottom View
Please click here to visit our online spice models database.