Owner manual

ZXTN25040DFH
Document number: DS33697 Rev. 2 - 2
2 of 7
www.diodes.com
January 2012
© Diodes Incorporated
A
Product Line o
f
Diodes Incorporated
ZXTN25040DFH
Maximum Ratings @T
A
= 25°C unless otherwise specified
Characteristic Symbol Value Unit
Collector-Base Voltage
V
CBO
130 V
Collector-Emitter Voltage (Forward Blocking)
V
CEX
130 V
Collector-Emitter Voltage
V
CEO
40 V
Emitter-Collector Voltage (Reverse Blocking)
V
ECO
6 V
Emitter-Base Voltage
V
EBO
7 V
Continuous Collector Current (Note 6)
I
C
4 A
Peak Pulse Current
I
CM
10 A
Base Current
I
B
1 A
Thermal Characteristics @T
A
= 25°C unless otherwise specified
Characteristic Symbol Value Unit
Power Dissipation
Linear Derating Factor
(Note 4)
P
D
-
0.73
5.84
W
mW/°C
(Note 5)
1.05
8.4
(Note 6)
1.25
9.6
(Note 7)
1.81
14.5
Thermal Resistance, Junction to Ambient
(Note 4)
R
θJA
171
°C/W
(Note 5) 119
(Note 6) 100
(Note 7) 69
Thermal Resistance, Junction to Lead (Note 8)
R
θJL
74.95
°C/W
Operating and Storage Temperature Range
T
J,
T
STG
-55 to +150
°C
Notes: 4. For a device surface mounted on 15mm X 15mm X 1.6mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; the device is
measured when operating in a steady-state condition.
5. For a device surface mounted on 25mm X 25mm X 1.6mm FR4 PCB with high coverage of single sided 2 oz copper, in still air conditions; the device is
measured when operating in a steady-state condition.
6. For a device surface mounted on 50mm X 50mm X 1.6mm FR4 PCB with high coverage of single sided 2 oz copper, in still air conditions; the device is
measured when operating in a steady-state condition.
7. As note 6 above, measured at t < 5 seconds
8. Thermal resistance from junction to solder-point (at the end of the collector lead).