User manual

Note: A separate switch is used to control each of the four LED arrays within one or more

Powerhouse

units. Diagram

shows 2 units wired together so that both can operate at 25%, 50%, 75% or 100% light level dependent upon switching.

•

After the connections have been secured, the floodlight front (Connection Box front) should be fastened to the

Connection Box using the 4 Connection Box Screws.

•

Once screws are secure, the screw covers should be fitted [Fig.10]

•

To secure the angle of light of the

Powerhouse

set the desired position, tighten the 2 Securing bolts then use the 2 x

Allen screws and washers to lock the position of the

Powerhouse

on the U bracket [Fig.11].

5. AFTER CONNECTING POWER SUPPLY

9: 2

NEUTR

Fig. 10 Fig. 11