Safety Information

Report No.: AGC04298180501ES01
Page 7 of 51
EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
1.6.2
Input current
(See appended table 1.6.2)
P
1.6.3
Voltage limit of hand-held equipment
N
1.6.4
Neutral conductor
Class Ⅲ equipment, no neutral
conductor.
N
1.7
Marking and instructions
P
1.7.1
Power rating
See below
P
Rated voltage(s) or voltage range(s) (V) ............. :
12V
--
Symbol for nature of supply, for d.c. only ............. :
--
Rated frequency or rated frequency range (Hz) .. :
--
Rated current (mA or A) ...................................... :
1A
--
1.7.1.2
Identification markings
P
Manufacturer‟s name or trademark or identification
mark ..................................................................... :
See marking plate.
--
Type/model or type reference ............................... :
See marking plate.
--
Symbol for Class II equipment only ..................... :
Class Ⅲ equipment
--
Other marking and symbols ................................. :
See marking plate.
--
1.7.1.3
Use of graphical symbols
P
1.7.2
Safety instructions and marking
Provided
P
1.7.2.1
General
See below.
P
1.7.2.2
Disconnect devices
No such devices
N
1.7.2.3
Overcurrent protective device
N
1.7.2.4
IT power distribution systems
N
1.7.2.5
Operator access with a tool
N
1.7.2.6
Ozone
N
1.7.3
Short duty cycles
Equipment is designed for
continuous operation.
N
1.7.4
Supply voltage adjustment .................................. :
No such devices used
N
Methods and means of adjustment; reference to
installation instructions ........................................ :
N
1.7.5
Power outlets on the equipment .......................... :
N
1.7.6
Fuse identification (marking, special fusing
characteristics, cross-reference) ......................... :
N
1.7.7
Wiring terminals
N
1.7.7.1
Protective earthing and bonding terminals .......... :
Class Ⅲ equipment, no protective
earthing
N
1.7.7.2
Terminal for a.c. mains supply conductors
N