Instruction Manual

13
DISENGAGING LATCH INSTALLATION
Follow above instructions in reverse:
1) Depress the cam lock lever while pulling child seat away from
the vehicle seat back until the LATCH straps are extended all the
way.
2) Disconnect LATCH connectors from vehicle anchors.
3) Pull LATCH adjuster straps to recess the LATCH connectors
into the back of the booster seat bottom for safe storage.
Proper Positioning on Vehicle Seat
Place booster seat on vehicle seat so it is
resting rmly on vehicle seat bottom and
touching the vehicle seat back.
IMPORTANT: When using the booster seat
as a high-back booster, try to position back-
rest in full contact with vehicle seat back. It
may also be necessary to adjust the recline
angle of the booster seat to match that of the vehicle seat.
IMPORTANT: When using booster seat in center seating posi-
tion, make sure it is stable and does not rock from side to side.
IMPORTANT: Do not use LATCH if installation interferes with
vehicle seat belt.
ADJUSTING THE RECLINE ANGLE
This booster seat features a recline angle that can adjust to
match that of the vehicle seat:
1) Push booster seat backrest backwards until you hear a click.
Backrest will now pivot freely and does not need to click into
another position.
2) Push seat bottom and backrest of booster seat down and
back into vehicle seat until there is secure positioning and full
contact with the booster seat and vehicle seat bottom and
vehicle seat back.