Instruction Manual

11
3
4
5
1
2
3. Pull harness adjusting strap
until harness begins to
tighten. (Fig. 3) If strap
does not slide freely, fold
restraint, remove harness
adjusting strap from fold
joint and repeat step 3.
4. Fasten both fabric side
panels to center panel.
(Fig. 4)
5. Slide red carry strap into
bottom slot in center of
cover when not in use.
(Fig. 5)
Folding Restraint
1. Remove red carry strap from
behind cover and unbuckle
harness. Unfasten both
fabric side panels and tuck
them into the sides. (Fig. 1)
2. Loosen harness: lift harness
adjuster while pulling the
harness straps all the way
forward. (Fig. 2)
3. Adjust expandable sides to
their inward position (Fig. 2A)
(continued next page)
A A