Instruction Manual

12
3
4
5
Folding Restraint
(continued)
5. Place restraint on its back,
push either release lever
downward to release
locking bolts. (Fig. 3)
6. Pull harness straps rmly
toward top center restraint.
Keep buckle extended
toward top of restraint
while folding seat bottom
into back. (Fig. 4)
Folding Tips: to fold restraint completely:
• Loosen harness suciently.
• Unfasten and tuck fabric side panels into the sides.
• Pull harness buckle toward top of restraint.
• Make sure cover fabric or harness webbing is not caught
in the steel supports when folding.
IMPORTANT:
If restraint does not easily fold completely, do NOT force it
closed. See below: ‘Folding Tips’
7. Fasten red carry strap to
secure restraint in its folded
position. (Fig. 5)
WARNING:
Restraint can accidentally
unfold and cause injury if not
properly secured by carry
strap.