Instruction Manual
18
Rear-Facing Lap-Belt Installation
1
2
WARNING:
• You must use restraint rear-facing if child is less than 1
year and weighs less than 20 lbs.
• Detachable base must be used with rear-facing restraint.
• Do NOT use SafeStop with rear-facing child.
Fig. 1 shows a typical rear-
facing installation with a lap
vehicle seat belt.
1. Conrm detachable base is
securely attached to restraint
bottom. (see page 13)
2. Place restraint in proper
rear-facing position:
Restraint bottom and base are both at on the vehicle
seat with front of restraint against the back of that
vehicle seat. (Fig. 1)
Note: It may be necessary to move vehicle front seats
slightly forward to properly t a rear-facing restraint.
3. Route seat belt through
rear-facing belt path. (Fig. 2)
Conrm seat belt lays at
and is not twisted.