Instruction Manual
23
3. Push on restraint to force it
into vehicle seat while
pulling loose end of seat
belt to remove slack and
tighten lap portion of seat
belt. (Fig. 5)
WARNING:
• Make sure vehicle seat belt is properly locked.
• Failure to properly lock seat belt will result in an unsafe
installation that will greatly increase the potential for
injury or death to the child in an accident.
• Carefully read vehicle owner’s manual to determine seat
belt locking requirements or contact vehicle manufac-
turer.
See page 39 for instructions on using a locking clip.
CHECK LIST:
Conrm restraint is properly positioned.
Conrm seat belt is tight and securely locked.
Conrm seat belt buckle is properly fastened.
Conrm restraint is stable (see page 25).
Removal:
Release seat belt buckle and disconnect top tether if in
use. Properly store top tether.
5