Instruction Manual
24
WARNING:
• Do NOT place infant in forward-facing restraint until
1 year and 20 lbs.
• Always use SafeStop with
forward-facing child under
40lbs. (see page 28).
• Remove detachable base when
restraint is installed forward-
facing.
Fig. 1 shows a typical forward-
facing installation with a lap
vehicle seat belt.
Stability of installation can be
improved by using top tether
shown in blue, Fig. 1 (see page
30 for top tether instructions).
1. Place restraint in forward-
facing position: Lower the
adjustable bottom (see page
29) for child over 25lbs, but
do not for child under 25lbs.
Place restraint bottom at on
vehicle seat and slide back
until top of restraint rmly
contacts vehicle seat back.
2. Route seat belt through
forward-facing belt path and
behind restraint cover and
buckle it. (Figs. 2 & 3)
Conrm seat belt lays at and
is not twisted.
Installation Tip:
Unfasten fabric side panels and
reach behind restraint cover for
easy access to belt path. (Fig. 4)
Forward-Facing Lap-Belt
Installation
1
2
3
4