Instruction Manual

Restraint Cover

Note: It is not necessary to remove buckle tongs or chest clip

from harness straps when removing and replacing restraint

cover.

Removing restraint cover:

1. Unthread harness shoulder straps from back of restraint

(see page 36, adjusting harness height).

2. Remove fasteners securing

cover to inside of restraint

bottom. (Fig. 1-A)

3. Unhook fasteners securing

cover to front of restraint.

(Fig. 1-B)

4. Carefully remove upper

portion of cover from

restraint taking care not to

damage the white EPS foam

panels, and then remove

cover from bottom portion

of the restraint.

Replacing restraint cover:

To replace the cover, follow cover removal instructions in

reverse order. Make sure harness shoulder straps are

threaded through correct slots and that harness straps are

not twisted. (See page 36, for changing harness height.)