Instruction Manual

LATCH Installation (continued)

Attach both LATCH connectors to the vehicle anchors,

starting with the connector that is furthest from you.

For ease of use, make sure open end of hooks face upward during use.

While pushing booster against vehicle seat,

pull one adjuster strap tight and

then the other.

NOTE: Even with LATCH properly

attached and adjusted,

child seat will still have movement

against the vehicle seat back and bottom.

DISENGAGING LATCH INSTALLATION

Follow above instructions in reverse:

1) Depress the cam lock lever while pulling child seat

away from the vehicle seat back until the LATCH straps

are extended all the way.

2) Disconnect LATCH connectors from vehicle anchors.

3) Pull LATCH adjuster straps to recess the

LATCH connectors into the back of the booster seat bottom for safe storage.