Instructions / Assembly

38 en
Opening, closing, and stopping the door
In order to operate the opener using the transmitter, this
opener function first has to “learn in” the code of a particular
transmitter. See “Program the transmitter”.
1. To open and close the door, press the corresponding
button on the transmitter one time (e.g. button 1).
Depending on the starting position, the door either opens
or closes.
⇒ The light switches off automatically after
180 seconds.
2. To stop the door, press the corresponding transmitter
button during the open/close procedure.
Pressing the transmitter button again causes the door to
move back to its respective starting position.
Turning the light on or off
In order to be able to switch the light on the opener on or off
separately using the transmitter, a second transmitter button
has to be “learned in” and assigned to this function.
See “Programming the transmitter”.
1. Press the corresponding transmitter button once to
switch the light on.
⇒ The light is switched on and switches off automati-
cally after 180 seconds.
2. Press the corresponding transmitter button once to
switch the light off. If the light was automatically switched
on during the opener movement, it can only be switched
off after the opener movement has completed.
13.3. Operating the opener with the wall
station
Opening, closing, and stopping the door
1
1. To open and close, press the button (1) once.
The door opens or closes depending on the starting
position.
⇒ The light switches off automatically after
180 seconds.
STOP
1
2. To stop, press the button (1) during the open/close pro-
cedure once. The next press of the button (1) causes the
door to move back to its respective position.
13. Operation