Installation Guide

Instructions on installing the off-the-wall wall-mount faucet
system (US Utility Patent Pending)
Step 1: Align the back splash case to the top, back of the vanity and screw in the machine screws
using the allen wrenech until tightened.
Step 2: The spacer blocks are pre-installed as shown in the picture. Using this default
configuration allows you to fit Danze wall mount rough in model D106800BT. If you prefer to
use other brands, you might need to manipulate the spacer configurations/ locations/number of
spacers and secure the spacer blocks onto the protruded substrate before you can mount the
other rough in valves.