Installation Guide

Convertible Infinity Under-mount Spa Sink® Manual
Installation
1. Lay the stone top in place. DO NOT glue the top/sinks on yet.
2. Set the metal stand inside the square porcelain sink.
3. Adjust all 4 legs, one leg at a time by twisting it, so the stand’s top surface is
at the same level/surface of the bottom of the stone top surface as shown.
4. Take the stands out and line the porcelain sink with food shrink wrap, cover
all porcelain areas, and put the stand back into the sink. Put the stone
square onto the metal plate, leaving same spacing between front and back,
left and right. If the back side of the metal is showing when you look down,
move the sink backward a bit and adjust the marble placement accordingly.
5. Glue the sinks and top to the cabinet.

Summary of content (2 pages)