OUTDOOR FIREPIT ITEM # PAG-1106-Rectangular INSTALLATION AND USER’S INSTRUCTIONS 1
PACKAGE CONTENTS PART DESCRIPTION QTY A FIREPIT TABLETOP 1 B PART A 1 C PART B 1 D PART C 1 E PART D 1 F PART E 1 G RECTANGULAR BRAZIER 1 H BURNER COVER 1 I 1/4”*18 BOLTS 16 J M4*25 BOLTS 4 K M4 SCREW NUT 4 L WASHERS 16 M “AAA” BATTERY (1.
ASSEMBLY NOTE: It is best to use TWO PEOPLE for assembly of this gas fire pit. 1. Carefully unpack all items from the box. Place the base in the final position. There must be a minimum of 48 in / 122 cm of clearance from the side of the table top to any combustible walls. 2. Place the tabletop on the base.
3.Pour the lava rock into the burner pan completely covering the burner. 4. Connect the hose and regulator to the cylinder. The propane gas and cylinder are sold separately. Use a standard 20 lb / 9.1kg. propane cylinder only. Use this fire pit only with a propane vapor withdrawal supply system. See Chapter 5 of the standard for storage and handling of liquefied petroleum gas, ANSI/NFPA 58. Your local library or fire department should have this book.